Click image to view full size image
Passive POE Cable, PoE Splitter x1, PoE Injector x1, 30M(pair)
Passive POE Cable with PoE Splitter and PoE Injector (POE30M)
Specifications
Connector Barrel size is 2.1mm (5.5 x 2.1 mm)
Power Pins 4,5 + and 7,8 -
1. It is very simple to connect a passive PoE. On the lower part, we connect the Ethernet
RJ connector of passive PoE to the PC, Hub or Switch and connect the power adapter
to the power socket.
2. On the opposite end (RJ socket) we connect the Ethernet cable leading to the far end.
3. At the far end, we connect the end of the Ethernet cable to the RJ45 socket and connect
the power connectors and the Ethernet to the powered equipment. The equipment is now connected by them.
Input / Output Specifications
DC Input Voltage 48V ± 5 %；
DC Output Voltage 48V ± 5 %
Max Output Current 0.4A Max.；
Over Current Protection None
General Sepcifications:
Operating Temperature 0oC ~ +45oC；
Storage Temperature -30oC ~ +70oC
CASE OF MATERIAL PVC；
Ethernet Date Rate 10/100Mbps
Ethernet Cable TIA/EIA 568 Cat.5；
Humidity Up to 90%
Weight: 70g；
DC Plugs 2.1mmx5.5mmx12mm
Package Include:
PoE Splitter x1；
PoE Injector x1